Differences

This shows you the differences between two versions of the page.

--- linux64 [2026/05/30 16:43] – [nvidia [old]] bengt
+++ linux64 [2026/06/01 09:43] (current) – [Moving boot disk from sata to m.2] bengt
@@ Line 78: / Line 78: @@
 Removed a kernel and tried this instead:
-echo -e 'add_drivers+=" nvme ahci libata sd_mod "' | sudo tee /etc/dracut.conf.d/generic.conf
+  # echo -e 'add_drivers+=" nvme ahci libata sd_mod "' | tee /etc/dracut.conf.d/generic.conf
-dracut --force
+  # dracut --force
+Then clone again. Remove sata and boot from nvme to check that it works. This time it did. Then boot livecd again, install gparted and use this to expand /boot and move and expand / putting the swap at the end as well. Reboot
-Then clone again. Remove sata and boot from nvme to check that it works. This time it did.
+Also took the time to get new rescue images as my old ones were from 2016, remove old vmlinuz/initramfs for rescue first:
+  # /usr/lib/kernel/install.d/51-dracut-rescue.install add "$(uname -r)" /boot "/boot/vmlinuz-$(uname -r)"
-Then boot livecd again, install gparted and use this to expand /boot and move and expand / putting the swap at the end as well.
@@ Line 167: / Line 167: @@
 https://rpmfusion.org/Howto/NVIDIA
-==== TBS 6280 PCIe DVB-T2 ====
+==== TBS 6280 PCIe DVB-T2 [old] ====
 A PCIe card for recording DVB-T2 TV. Linux driver support from the manufacturer, which means that you have to recompile it on kernel update. Official linux drivers can be downloaded at http://www.tbsdtv.com/download/ and open source at https://github.com/ljalves/linux_media/wiki/Installating. Visit https://www.tbsdtv.com/forum/viewtopic.php?f=87&t=25422 and http://www.tbsdtv.com/forum/viewforum.php?f=49 for a forum.